Precautions for use of pipe cutting machine
1. The spindle speed must be changed after stopping. The gears should be fully engaged when changing speed. When the machine tool is found to be abnormal, stop the machine immediately for inspection.
2. Adjust the cutting tool and clamp the working object before cutting. The length of the clamping part shall not be less than 50 mm. The parking baffle should be fixed and can be operated after clamping, loosening, forward and backward test run.
3. When the machine tool is rotating, any part of the human body shall not contact the transmission parts. During operation, cuff should be tied up and gloves are strictly prohibited. The head of human body should deviate from the cutting direction.
4. When changing the tool, measuring the workpiece, lubricating and cleaning the pipe head, the machine must be stopped.
5. When cutting the pipe head, it is necessary to prevent the pipe head from flying out to hurt people.
6. When the long material pipe is put into the material rack and the binding lead wire is loosened, measures shall be taken to prevent the pipe from rolling, impacting and crushing.
同城彩票平台7. Before using the grinding wheel pipe cutting machine, the grinding wheel should be checked for defects, cracks, moisture, and whether the power line is reliable.
8. The dust removal device of pipe cutter should be in good condition before cutting.
9. Do not stand in the direction of the workpiece feeding and discharging.
同城彩票平台Zaozhuang Make Machinery Co., Ltd. is selling hot pipe cutting machine MM-QG-51，MM-QB-51,MM-QB-51A，welcome to buy!
Copyright © Zaozhuang Make Machinery Co., Ltd. | Sitemap | Technical Support